The ultimate multitool for Yamaha Ténéré 700
- SW 27 for rear wheel axle
- SW19 for front wheel axle
- SW 10 for front axle Clamping screws
- SW 6.8 spoke wrench (NEW)
- Auxiliary tool for changing tires
- Replacement clutch lever in case of cable or lever breakage
- Can be stowed in 2 different places
- Instruction manual
- Inside hexagon SW 27 for rear wheel nut
- Outer hexagon SW 19 for front wheel axle
- Inside hexagon SW 10 for front axle Clamping screws
- Holder for hanging in the clutch lever at the engine outlet
- Can be used as an auxiliary tool when fitting tires
- 2 storage options: Under the seat, or instead of the right footrest, or between the footrest and the frame
- Copper-plated/galvanized/chrome-plated steel for the best possible corrosion protection
- Has a special shape so that the mounting hole for the clutch output shaft is not destroyed when the nut is hit with a stone or hammer
- 2 cable ties to secure the lever to the clutch lever
- Various holders for fastening
- Weight: 285.8 g
- Part List
You can even change a tire with this multitool.
And:
If the clutch cable, clutch lever, the entire fitting or even your left hand
is damaged, you can easily get on with it.
Simply hang the lever on the clutch lever and clutch with your foot.
A little practice and you'll be able to get on quickly without ADAC.
Innovative attachment under the seat, or instead of the rear footrest .
This prevents the key from causing damage by banging around off-road.
Always with you and also serves as a lashing eye for luggage.
If you wish, you can also use DIN912 M8x65 10.8 screws to reattach the rear footrests again.
(But who takes anyone with them on long journeys :-) )
Unfortunately no weight saving, but useful and tidy.
Because it's a cool tool...
And of course we've also had it patented at the patent office ;-)
.png "Multitool Yamaha Tenere 700")
.png "Preview: Multitool Yamaha Tenere 700")
.png "Multitool Yamaha Tenere 700")
